# -*- rpm-spec -*- # If neither fedora nor rhel was defined, try to guess them from %{dist} %if !0%{?rhel} && !0%{?fedora} %{expand:%(echo "%{?dist}" | \ sed -ne 's/^\.el\([0-9]\+\).*/%%define rhel \1/p')} %{expand:%(echo "%{?dist}" | \ sed -ne 's/^\.fc\?\([0-9]\+\).*/%%define fedora \1/p')} %endif # A client only build will create a libvirt.so only containing # the generic RPC driver, and test driver and no libvirtd # Default to a full server + client build %define client_only 0 # Now turn off server build in certain cases # RHEL-5 builds are client-only for s390, ppc %if 0%{?rhel} == 5 %ifnarch i386 i586 i686 x86_64 ia64 %define client_only 1 %endif %endif # Disable all server side drivers if client only build requested %if %{client_only} %define server_drivers 0 %else %define server_drivers 1 %endif # Now set the defaults for all the important features, independent # of any particular OS # First the daemon itself %define with_libvirtd 0%{!?_without_libvirtd:%{server_drivers}} %define with_avahi 0%{!?_without_avahi:%{server_drivers}} # Then the hypervisor drivers that run on local host %define with_xen 0%{!?_without_xen:%{server_drivers}} %define with_qemu 0%{!?_without_qemu:%{server_drivers}} %define with_openvz 0%{!?_without_openvz:%{server_drivers}} %define with_lxc 0%{!?_without_lxc:%{server_drivers}} %define with_vbox 0%{!?_without_vbox:%{server_drivers}} %define with_uml 0%{!?_without_uml:%{server_drivers}} %define with_xenapi 0%{!?_without_xenapi:%{server_drivers}} %define with_libxl 0%{!?_without_libxl:%{server_drivers}} # Then the hypervisor drivers that talk a native remote protocol %define with_phyp 0%{!?_without_phyp:1} %define with_esx 0%{!?_without_esx:1} %define with_vmware 0%{!?_without_vmware:1} # Then the secondary host drivers %define with_network 0%{!?_without_network:%{server_drivers}} %define with_storage_fs 0%{!?_without_storage_fs:%{server_drivers}} %define with_storage_lvm 0%{!?_without_storage_lvm:%{server_drivers}} %define with_storage_iscsi 0%{!?_without_storage_iscsi:%{server_drivers}} %define with_storage_disk 0%{!?_without_storage_disk:%{server_drivers}} %define with_storage_mpath 0%{!?_without_storage_mpath:%{server_drivers}} %define with_numactl 0%{!?_without_numactl:%{server_drivers}} %define with_selinux 0%{!?_without_selinux:%{server_drivers}} # A few optional bits off by default, we enable later %define with_polkit 0%{!?_without_polkit:0} %define with_capng 0%{!?_without_capng:0} %define with_netcf 0%{!?_without_netcf:0} %define with_udev 0%{!?_without_udev:0} %define with_hal 0%{!?_without_hal:0} %define with_yajl 0%{!?_without_yajl:0} %define with_nwfilter 0%{!?_without_nwfilter:0} %define with_libpcap 0%{!?_without_libpcap:0} %define with_macvtap 0%{!?_without_macvtap:0} %define with_libnl 0%{!?_without_libnl:0} %define with_audit 0%{!?_without_audit:0} %define with_dtrace 0%{!?_without_dtrace:0} %define with_cgconfig 0%{!?_without_cgconfig:0} # Non-server/HV driver defaults which are always enabled %define with_python 0%{!?_without_python:1} %define with_sasl 0%{!?_without_sasl:1} # Finally set the OS / architecture specific special cases # Xen is available only on i386 x86_64 ia64 %ifnarch i386 i586 i686 x86_64 ia64 %define with_xen 0 %endif # Numactl is not available on s390[x] %ifarch s390 s390x %define with_numactl 0 %endif # RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor, # VMWare, libxenserver (xenapi), or libxenlight (Xen 4.1 and newer) %if 0%{?rhel} %define with_openvz 0 %define with_vbox 0 %define with_uml 0 %define with_phyp 0 %define with_vmware 0 %define with_xenapi 0 %define with_libxl 0 %endif # RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC %if 0%{?rhel} == 5 %ifnarch x86_64 %define with_qemu 0 %endif %define with_lxc 0 %endif # RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen # on all archs. Other archs all have LXC available though %if 0%{?rhel} >= 6 %ifnarch x86_64 %define with_qemu 0 %endif %define with_xen 0 %endif # Fedora doesn't have any QEMU on ppc64 - only ppc %if 0%{?fedora} %ifarch ppc64 %define with_qemu 0 %endif %endif # Fedora doesn't have new enough Xen for libxl until F16 %if 0%{?fedora} < 16 %define with_libxl 0 %endif # PolicyKit was introduced in Fedora 8 / RHEL-6 or newer %if 0%{?fedora} >= 8 || 0%{?rhel} >= 6 %define with_polkit 0%{!?_without_polkit:1} %endif # libcapng is used to manage capabilities in Fedora 12 / RHEL-6 or newer %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6 %define with_capng 0%{!?_without_capng:1} %endif # netcf is used to manage network interfaces in Fedora 12 / RHEL-6 or newer %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6 %define with_netcf 0%{!?_without_netcf:%{server_drivers}} %endif # udev is used to manage host devices in Fedora 12 / RHEL-6 or newer %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6 %define with_udev 0%{!?_without_udev:%{server_drivers}} %else %define with_hal 0%{!?_without_hal:%{server_drivers}} %endif # Enable yajl library for JSON mode with QEMU %if 0%{?fedora} >= 13 || 0%{?rhel} >= 6 %define with_yajl 0%{!?_without_yajl:%{server_drivers}} %endif # Enable libpcap library %if %{with_qemu} %define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}} %define with_libpcap 0%{!?_without_libpcap:%{server_drivers}} %define with_macvtap 0%{!?_without_macvtap:%{server_drivers}} %endif %if %{with_macvtap} %define with_libnl 1 %endif %if 0%{?fedora} >= 11 || 0%{?rhel} >= 5 %define with_audit 0%{!?_without_audit:1} %endif %if 0%{?fedora} >= 13 || 0%{?rhel} >= 6 %define with_dtrace 1 %endif # Pull in cgroups config system %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6 %if %{with_qemu} || %{with_lxc} %define with_cgconfig 0%{!?_without_cgconfig:1} %endif %endif # Force QEMU to run as non-root %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6 %define qemu_user qemu %define qemu_group qemu %else %define qemu_user root %define qemu_group root %endif # The RHEL-5 Xen package has some feature backports. This # flag is set to enable use of those special bits on RHEL-5 %if 0%{?rhel} == 5 %define with_rhel5 1 %else %define with_rhel5 0 %endif # there's no use compiling the network driver without # the libvirt daemon %if ! %{with_libvirtd} %define with_network 0 %endif Summary: Library providing a simple virtualization API Name: libvirt Version: 0.9.0 Release: 1%{?dist}%{?extra_release}.art License: LGPLv2+ Group: Development/Libraries Source: http://libvirt.org/sources/libvirt-%{version}.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root URL: http://libvirt.org/ Patch1: libvirt-0.9.0-libxl_log_dir.patch # Required by above patch BuildRequires: autoconf automake libtool gettext-devel # All runtime requirements for the libvirt package (runtime requrements # for subpackages are listed later in those subpackages) # The client side, i.e. shared libs and virsh are in a subpackage Requires: %{name}-client = %{version}-%{release} # Used by many of the drivers, so turn it on whenever the # daemon is present %if %{with_libvirtd} Requires: bridge-utils # for modprobe of pci devices Requires: module-init-tools # for /sbin/ip Requires: iproute %endif %if %{with_network} Requires: dnsmasq >= 2.41 Requires: radvd %endif %if %{with_network} || %{with_nwfilter} Requires: iptables Requires: iptables-ipv6 %endif %if %{with_nwfilter} Requires: ebtables %endif # needed for device enumeration %if %{with_hal} Requires: hal %endif %if %{with_udev} Requires: udev >= 145 %endif %if %{with_polkit} %if 0%{?fedora} >= 12 || 0%{?rhel} >=6 Requires: polkit >= 0.93 %else Requires: PolicyKit >= 0.6 %endif %endif %if %{with_storage_fs} Requires: nfs-utils # For glusterfs %if 0%{?fedora} >= 11 Requires: glusterfs-client >= 2.0.1 %endif %endif %if %{with_qemu} # From QEMU RPMs Requires: /usr/bin/qemu-img # For image compression Requires: gzip Requires: bzip2 Requires: lzop Requires: xz %else %if %{with_xen} # From Xen RPMs Requires: /usr/sbin/qcow-create %endif %endif %if %{with_storage_lvm} # For LVM drivers Requires: lvm2 %endif %if %{with_storage_iscsi} # For ISCSI driver Requires: iscsi-initiator-utils %endif %if %{with_storage_disk} # For disk driver Requires: parted Requires: device-mapper %endif %if %{with_storage_mpath} # For multipath support Requires: device-mapper %endif %if %{with_cgconfig} Requires: libcgroup %endif # All build-time requirements BuildRequires: python-devel %if %{with_xen} BuildRequires: xen-devel # temporary explicit requireent missing from xen-4.1.0 %if %{with_libxl} BuildRequires: libuuid-devel %endif %endif BuildRequires: libxml2-devel BuildRequires: xhtml1-dtds BuildRequires: libxslt BuildRequires: readline-devel BuildRequires: ncurses-devel BuildRequires: gettext BuildRequires: gnutls-devel %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6 # for augparse, optionally used in testing BuildRequires: augeas %endif %if %{with_hal} BuildRequires: hal-devel %endif %if %{with_udev} BuildRequires: libudev-devel >= 145 BuildRequires: libpciaccess-devel >= 0.10.9 %endif %if %{with_yajl} BuildRequires: yajl-devel %endif %if %{with_libpcap} BuildRequires: libpcap-devel %endif %if %{with_libnl} BuildRequires: libnl-devel %endif %if %{with_avahi} BuildRequires: avahi-devel %endif %if %{with_selinux} BuildRequires: libselinux-devel %endif %if %{with_network} BuildRequires: dnsmasq >= 2.41 BuildRequires: iptables BuildRequires: iptables-ipv6 BuildRequires: radvd %endif %if %{with_nwfilter} BuildRequires: ebtables %endif BuildRequires: bridge-utils BuildRequires: module-init-tools %if %{with_sasl} BuildRequires: cyrus-sasl-devel %endif %if %{with_polkit} %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6 # Only need the binary, not -devel BuildRequires: polkit >= 0.93 %else BuildRequires: PolicyKit-devel >= 0.6 %endif %endif %if %{with_storage_fs} # For mount/umount in FS driver BuildRequires: util-linux %endif %if %{with_qemu} # From QEMU RPMs BuildRequires: /usr/bin/qemu-img %else %if %{with_xen} # From Xen RPMs BuildRequires: /usr/sbin/qcow-create %endif %endif %if %{with_storage_lvm} # For LVM drivers BuildRequires: lvm2 %endif %if %{with_storage_iscsi} # For ISCSI driver BuildRequires: iscsi-initiator-utils %endif %if %{with_storage_disk} # For disk driver BuildRequires: parted-devel %if 0%{?rhel} == 5 # Broken RHEL-5 parted RPM is missing a dep BuildRequires: e2fsprogs-devel %endif %endif %if %{with_storage_mpath} # For Multipath support %if 0%{?rhel} == 5 # Broken RHEL-5 packaging has header files in main RPM :-( BuildRequires: device-mapper %else BuildRequires: device-mapper-devel %endif %endif %if %{with_numactl} # For QEMU/LXC numa info BuildRequires: numactl-devel %endif %if %{with_capng} BuildRequires: libcap-ng-devel >= 0.5.0 %endif %if %{with_phyp} BuildRequires: libssh2-devel %endif %if %{with_netcf} BuildRequires: netcf-devel >= 0.1.4 %endif %if %{with_esx} %if 0%{?fedora} >= 9 || 0%{?rhel} >= 6 BuildRequires: libcurl-devel %else BuildRequires: curl-devel %endif %endif %if %{with_audit} BuildRequires: audit-libs-devel %endif %if %{with_dtrace} # we need /usr/sbin/dtrace BuildRequires: systemtap-sdt-devel %endif %if %{with_storage_fs} # For mount/umount in FS driver BuildRequires: util-linux # For showmount in FS driver (netfs discovery) BuildRequires: nfs-utils %endif # Fedora build root suckage BuildRequires: gawk %description Libvirt is a C toolkit to interact with the virtualization capabilities of recent versions of Linux (and other OSes). The main package includes the libvirtd server exporting the virtualization support. %package client Summary: Client side library and utilities of the libvirt library Group: Development/Libraries Requires: readline Requires: ncurses # So remote clients can access libvirt over SSH tunnel # (client invokes 'nc' against the UNIX socket on the server) Requires: nc # Needed by libvirt-guests init script. Requires: gettext # Needed by virt-pki-validate script. Requires: gnutls-utils %if %{with_sasl} Requires: cyrus-sasl # Not technically required, but makes 'out-of-box' config # work correctly & doesn't have onerous dependencies Requires: cyrus-sasl-md5 %endif %description client Shared libraries and client binaries needed to access to the virtualization capabilities of recent versions of Linux (and other OSes). %package devel Summary: Libraries, includes, etc. to compile with the libvirt library Group: Development/Libraries Requires: %{name}-client = %{version}-%{release} Requires: pkgconfig %if %{with_xen} Requires: xen-devel %endif %description devel Includes and documentations for the C library providing an API to use the virtualization capabilities of recent versions of Linux (and other OSes). %if %{with_python} %package python Summary: Python bindings for the libvirt library Group: Development/Libraries Requires: %{name}-client = %{version}-%{release} %description python The libvirt-python package contains a module that permits applications written in the Python programming language to use the interface supplied by the libvirt library to use the virtualization capabilities of recent versions of Linux (and other OSes). %endif %prep %setup -q %patch1 -p1 %build %if ! %{with_xen} %define _without_xen --without-xen %endif %if ! %{with_qemu} %define _without_qemu --without-qemu %endif %if ! %{with_openvz} %define _without_openvz --without-openvz %endif %if ! %{with_lxc} %define _without_lxc --without-lxc %endif %if ! %{with_vbox} %define _without_vbox --without-vbox %endif %if ! %{with_xenapi} %define _without_xenapi --without-xenapi %endif %if ! %{with_libxl} %define _without_libxl --without-libxl %endif %if ! %{with_sasl} %define _without_sasl --without-sasl %endif %if ! %{with_avahi} %define _without_avahi --without-avahi %endif %if ! %{with_phyp} %define _without_phyp --without-phyp %endif %if ! %{with_esx} %define _without_esx --without-esx %endif %if ! %{with_vmware} %define _without_vmware --without-vmware %endif %if ! %{with_polkit} %define _without_polkit --without-polkit %endif %if ! %{with_python} %define _without_python --without-python %endif %if ! %{with_libvirtd} %define _without_libvirtd --without-libvirtd %endif %if ! %{with_uml} %define _without_uml --without-uml %endif %if %{with_rhel5} %define _with_rhel5_api --with-rhel5-api %endif %if ! %{with_network} %define _without_network --without-network %endif %if ! %{with_storage_fs} %define _without_storage_fs --without-storage-fs %endif %if ! %{with_storage_lvm} %define _without_storage_lvm --without-storage-lvm %endif %if ! %{with_storage_iscsi} %define _without_storage_iscsi --without-storage-iscsi %endif %if ! %{with_storage_disk} %define _without_storage_disk --without-storage-disk %endif %if ! %{with_storage_mpath} %define _without_storage_mpath --without-storage-mpath %endif %if ! %{with_numactl} %define _without_numactl --without-numactl %endif %if ! %{with_capng} %define _without_capng --without-capng %endif %if ! %{with_netcf} %define _without_netcf --without-netcf %endif %if ! %{with_selinux} %define _without_selinux --without-selinux %endif %if ! %{with_hal} %define _without_hal --without-hal %endif %if ! %{with_udev} %define _without_udev --without-udev %endif %if ! %{with_yajl} %define _without_yajl --without-yajl %endif %if ! %{with_libpcap} %define _without_libpcap --without-libpcap %endif %if ! %{with_macvtap} %define _without_macvtap --without-macvtap %endif %if ! %{with_audit} %define _without_audit --without-audit %endif %if ! %{with_dtrace} %define _without_dtrace --without-dtrace %endif %define when %(date +"%%F-%%T") %define where %(hostname) %define who %{?packager}%{!?packager:Unknown} %define with_packager --with-packager="%{who}, %{when}, %{where}" %define with_packager_version --with-packager-version="%{release}" autoreconf -if %configure %{?_without_xen} \ %{?_without_qemu} \ %{?_without_openvz} \ %{?_without_lxc} \ %{?_without_vbox} \ %{?_without_xenapi} \ %{?_without_sasl} \ %{?_without_avahi} \ %{?_without_polkit} \ %{?_without_python} \ %{?_without_libvirtd} \ %{?_without_uml} \ %{?_without_one} \ %{?_without_phyp} \ %{?_without_esx} \ %{?_without_vmware} \ %{?_without_network} \ %{?_with_rhel5_api} \ %{?_without_storage_fs} \ %{?_without_storage_lvm} \ %{?_without_storage_iscsi} \ %{?_without_storage_disk} \ %{?_without_storage_mpath} \ %{?_without_numactl} \ %{?_without_capng} \ %{?_without_netcf} \ %{?_without_selinux} \ %{?_without_hal} \ %{?_without_udev} \ %{?_without_yajl} \ %{?_without_libpcap} \ %{?_without_macvtap} \ %{?_without_audit} \ %{?_without_dtrace} \ %{with_packager} \ %{with_packager_version} \ --with-qemu-user=%{qemu_user} \ --with-qemu-group=%{qemu_group} \ --with-init-script=redhat \ --with-remote-pid-file=%{_localstatedir}/run/libvirtd.pid make %{?_smp_mflags} gzip -9 ChangeLog %install rm -fr %{buildroot} %makeinstall for i in domain-events/events-c dominfo domsuspend hellolibvirt openauth python xml/nwfilter systemtap do (cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in) done rm -f $RPM_BUILD_ROOT%{_libdir}/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.a %if %{with_network} install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/ # We don't want to install /etc/libvirt/qemu/networks in the main %files list # because if the admin wants to delete the default network completely, we don't # want to end up re-incarnating it on every RPM upgrade. install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/ cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml # Strip auto-generated UUID - we need it generated per-install sed -i -e "//d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml %else rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml %endif %if ! %{with_qemu} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %endif %find_lang %{name} %if ! %{with_lxc} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %endif %if ! %{with_python} rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version} %endif %if %{client_only} rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} %endif %if ! %{with_libvirtd} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version}/html \ $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-devel-%{version}/ %endif %if ! %{with_qemu} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu %endif %if ! %{with_lxc} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc %endif %if ! %{with_uml} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml %endif %clean rm -fr %{buildroot} #%check #cd tests ## These 3 tests don't current work in a mock build root #for i in nodeinfotest daemon-conf seclabeltest #do # rm -f $i # printf "#!/bin/sh\nexit 0\n" > $i # chmod +x $i #done #make check %pre %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6 # Normally 'setup' adds this in /etc/passwd, but this is # here for case of upgrades from earlier Fedora/RHEL. This # UID/GID pair is reserved for qemu:qemu getent group kvm >/dev/null || groupadd -g 36 -r kvm getent group qemu >/dev/null || groupadd -g 107 -r qemu getent passwd qemu >/dev/null || \ useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \ -c "qemu user" qemu %endif %post %if %{with_libvirtd} %if %{with_network} # We want to install the default network for initial RPM installs # or on the first upgrade from a non-network aware libvirt only. # We check this by looking to see if the daemon is already installed /sbin/chkconfig --list libvirtd 1>/dev/null 2>&1 if test $? != 0 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml then UUID=`/usr/bin/uuidgen` sed -e "s,,\n $UUID," \ < %{_datadir}/libvirt/networks/default.xml \ > %{_sysconfdir}/libvirt/qemu/networks/default.xml ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml fi # All newly defined networks will have a mac address for the bridge # auto-generated, but networks already existing at the time of upgrade # will not. We need to go through all the network configs, look for # those that don't have a mac address, and add one. network_files=$( (cd %{_localstatedir}/lib/libvirt/network && \ grep -L "mac address" *.xml; \ cd %{_sysconfdir}/libvirt/qemu/networks && \ grep -L "mac address" *.xml) 2>/dev/null \ | sort -u) for file in $network_files do # each file exists in either the config or state directory (or both) and # does not have a mac address specified in either. We add the same mac # address to both files (or just one, if the other isn't there) mac4=`printf '%X' $(($RANDOM % 256))` mac5=`printf '%X' $(($RANDOM % 256))` mac6=`printf '%X' $(($RANDOM % 256))` for dir in %{_localstatedir}/lib/libvirt/network \ %{_sysconfdir}/libvirt/qemu/networks do if test -f $dir/$file then sed -i.orig -e \ "s|\(|" \ $dir/$file if test $? != 0 then echo "failed to add " \ "to $dir/$file" mv -f $dir/$file.orig $dir/$file else rm -f $dir/$file.orig fi fi done done %endif %if %{with_cgconfig} if [ "$1" -eq "1" ]; then /sbin/chkconfig cgconfig on fi %endif /sbin/chkconfig --add libvirtd if [ "$1" -ge "1" ]; then /sbin/service libvirtd condrestart > /dev/null 2>&1 fi %endif %preun %if %{with_libvirtd} if [ $1 = 0 ]; then /sbin/service libvirtd stop 1>/dev/null 2>&1 /sbin/chkconfig --del libvirtd fi %endif %preun client if [ $1 = 0 ]; then /sbin/chkconfig --del libvirt-guests rm -f /var/lib/libvirt/libvirt-guests fi %post client /sbin/ldconfig /sbin/chkconfig --add libvirt-guests if [ $1 -ge 1 ]; then level=$(/sbin/runlevel | /bin/cut -d ' ' -f 2) if /sbin/chkconfig --list libvirt-guests | /bin/grep -q $level:on ; then # this doesn't do anything but allowing for libvirt-guests to be # stopped on the first shutdown /sbin/service libvirt-guests start > /dev/null 2>&1 || true fi fi %postun client -p /sbin/ldconfig %if %{with_libvirtd} %files %defattr(-, root, root) %doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/ %if %{with_network} %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart %endif %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/ %{_sysconfdir}/libvirt/nwfilter/*.xml %{_sysconfdir}/rc.d/init.d/libvirtd %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf %if %{with_dtrace} %{_datadir}/systemtap/tapsets/libvirtd.stp %endif %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/ %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/ %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/ %if %{with_libxl} %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/ %endif %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd %if %{with_qemu} %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu %endif %if %{with_lxc} %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc %endif %if %{with_uml} %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml %endif %dir %{_datadir}/libvirt/ %if %{with_network} %dir %{_datadir}/libvirt/networks/ %{_datadir}/libvirt/networks/default.xml %endif %dir %{_localstatedir}/run/libvirt/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/ %dir %attr(0700, root, root) %{_localstatedir}/cache/libvirt/ %if %{with_qemu} %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/ %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/ %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/ %endif %if %{with_lxc} %dir %{_localstatedir}/run/libvirt/lxc/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/ %endif %if %{with_uml} %dir %{_localstatedir}/run/libvirt/uml/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/ %endif %if %{with_libxl} %dir %{_localstatedir}/run/libvirt/libxl/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/ %endif %if %{with_network} %dir %{_localstatedir}/run/libvirt/network/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/ %endif %if %{with_qemu} %{_datadir}/augeas/lenses/libvirtd_qemu.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %endif %if %{with_lxc} %{_datadir}/augeas/lenses/libvirtd_lxc.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %endif %{_datadir}/augeas/lenses/libvirtd.aug %{_datadir}/augeas/lenses/tests/test_libvirtd.aug %if %{with_polkit} %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6 %{_datadir}/polkit-1/actions/org.libvirt.unix.policy %else %{_datadir}/PolicyKit/policy/org.libvirt.unix.policy %endif %endif %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/ %if %{with_lxc} %attr(0755, root, root) %{_libexecdir}/libvirt_lxc %endif %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper %attr(0755, root, root) %{_sbindir}/libvirtd %{_mandir}/man8/libvirtd.8* %doc docs/*.xml %endif %files client -f %{name}.lang %defattr(-, root, root) %doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO %{_mandir}/man1/virsh.1* %{_mandir}/man1/virt-xml-validate.1* %{_mandir}/man1/virt-pki-validate.1* %{_bindir}/virsh %{_bindir}/virt-xml-validate %{_bindir}/virt-pki-validate %{_libdir}/lib*.so.* %dir %{_datadir}/libvirt/ %dir %{_datadir}/libvirt/schemas/ %{_datadir}/libvirt/schemas/domain.rng %{_datadir}/libvirt/schemas/domainsnapshot.rng %{_datadir}/libvirt/schemas/network.rng %{_datadir}/libvirt/schemas/storagepool.rng %{_datadir}/libvirt/schemas/storagevol.rng %{_datadir}/libvirt/schemas/nodedev.rng %{_datadir}/libvirt/schemas/capability.rng %{_datadir}/libvirt/schemas/interface.rng %{_datadir}/libvirt/schemas/secret.rng %{_datadir}/libvirt/schemas/storageencryption.rng %{_datadir}/libvirt/schemas/nwfilter.rng %{_datadir}/libvirt/cpu_map.xml %{_sysconfdir}/rc.d/init.d/libvirt-guests %config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/ %if %{with_sasl} %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf %endif %files devel %defattr(-, root, root) %{_libdir}/lib*.so %dir %{_includedir}/libvirt %{_includedir}/libvirt/*.h %{_libdir}/pkgconfig/libvirt.pc %dir %{_datadir}/gtk-doc/html/libvirt/ %doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp %doc %{_datadir}/gtk-doc/html/libvirt/*.html %doc %{_datadir}/gtk-doc/html/libvirt/*.png %doc %{_datadir}/gtk-doc/html/libvirt/*.css %doc docs/*.html docs/html docs/*.gif %doc docs/libvirt-api.xml %doc examples/hellolibvirt %doc examples/domain-events/events-c %doc examples/dominfo %doc examples/domsuspend %doc examples/openauth %doc examples/xml %doc examples/systemtap %if %{with_python} %files python %defattr(-, root, root) %doc AUTHORS NEWS README COPYING.LIB %{_libdir}/python*/site-packages/libvirt.py* %{_libdir}/python*/site-packages/libvirtmod* %doc python/tests/*.py %doc python/TODO %doc examples/python %doc examples/domain-events/events-python %endif %changelog * Thu Apr 7 2011 Daniel Veillard - 0.9.0-1 - Support cputune cpu usage tuning - Add public APIs for storage volume upload/download - Add public API for setting migration speed on the fly - Add libxenlight driver - qemu: support migration to fd - libvirt: add virDomain{Get,Set}BlkioParameters - setmem: introduce a new libvirt API (virDomainSetMemoryFlags) - Expose event loop implementation as a public API - Dump the debug buffer to libvirtd.log on fatal signal - Audit support - Various improvements and bug fixes * Mon Mar 14 2011 Daniel Veillard - 0.8.8-3 - fix a lack of API check on read-only connections - CVE-2011-1146 * Mon Feb 21 2011 Daniel P. Berrange - 0.8.8-2 - Fix kernel boot with latest QEMU * Thu Feb 17 2011 Daniel Veillard - 0.8.8-1 - expose new API for sysinfo extraction - cgroup blkio weight support - smartcard device support - qemu: Support per-device boot ordering - Various improvements and bug fixes * Tue Feb 08 2011 Fedora Release Engineering - 0.8.7-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild * Thu Jan 6 2011 Daniel Veillard - 0.8.7-1 - Preliminary support for VirtualBox 4.0 - IPv6 support - Add VMware Workstation and Player driver driver - Add network disk support - Various improvements and bug fixes - from 0.8.6: - Add support for iSCSI target auto-discovery - QED: Basic support for QED images - remote console support - support for SPICE graphics - sysinfo and VMBIOS support - virsh qemu-monitor-command - various improvements and bug fixes * Fri Oct 29 2010 Daniel Veillard - 0.8.5-1 - Enable JSON and netdev features in QEMU >= 0.13 - framework for auditing integration - framework DTrace/SystemTap integration - Setting the number of vcpu at boot - Enable support for nested SVM - Virtio plan9fs filesystem QEMU - Memory parameter controls - various improvements and bug fixes * Wed Sep 29 2010 jkeating - 0.8.4-3 - Rebuilt for gcc bug 634757 * Thu Sep 16 2010 Dan HorĂ¡k - 0.8.4-2 - disable the nwfilterxml2xmltest also on s390(x) * Mon Sep 13 2010 Daniel Veillard - 0.8.4-1 - Upstream release 0.8.4 * Mon Aug 23 2010 Daniel P. Berrange - 0.8.3-2 - Fix potential overflow in boot menu code * Mon Aug 23 2010 Daniel P. Berrange - 0.8.3-1 - Upstream release 0.8.3 * Wed Jul 21 2010 David Malcolm - 0.8.2-3 - Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild * Mon Jul 12 2010 Daniel P. Berrange - 0.8.2-2 - CVE-2010-2237 ignoring defined main disk format when looking up disk backing stores - CVE-2010-2238 ignoring defined disk backing store format when recursing into disk image backing stores - CVE-2010-2239 not setting user defined backing store format when creating new image - CVE-2010-2242 libvirt: improperly mapped source privileged ports may allow for obtaining privileged resources on the host * Mon Jul 5 2010 Daniel Veillard - 0.8.2-1 - Upstream release 0.8.2 - phyp: adding support for IVM - libvirt: introduce domainCreateWithFlags API - add 802.1Qbh and 802.1Qbg switches handling - Support for VirtualBox version 3.2 - Init script for handling guests on shutdown/boot - qemu: live migration with non-shared storage for kvm * Fri Apr 30 2010 Daniel Veillard - 0.8.1-1 - Upstream release 0.8.1 - Starts dnsmasq from libvirtd with --dhcp-hostsfile - Add virDomainGetBlockInfo API to query disk sizing - a lot of bug fixes and cleanups * Mon Apr 12 2010 Daniel Veillard - 0.8.0-1 - Upstream release 0.8.0 - Snapshotting support (QEmu/VBox/ESX) - Network filtering API - XenAPI driver - new APIs for domain events - Libvirt managed save API - timer subselection for domain clock - synchronous hooks - API to update guest CPU to host CPU - virDomainUpdateDeviceFlags new API - migrate max downtime API - volume wiping API - and many bug fixes * Tue Mar 30 2010 Richard W.M. Jones - 0.7.7-3.fc14 - No change, just rebuild against new libparted with bumped soname. * Mon Mar 22 2010 Cole Robinson - 0.7.7-2.fc14 - Fix USB devices by product with security enabled (bz 574136) - Set kernel/initrd in security driver, fixes some URL installs (bz 566425) * Fri Mar 5 2010 Daniel Veillard - 0.7.7-1 - macvtap support - async job handling - virtio channel - computing baseline CPU - virDomain{Attach,Detach}DeviceFlags - assorted bug fixes and lots of cleanups * Tue Feb 16 2010 Adam Jackson 0.7.6-2 - libvirt-0.7.6-add-needed.patch: Fix FTBFS from --no-add-needed - Add BuildRequires: xmlrpc-c-client for libxmlrpc_client.so * Wed Feb 3 2010 Daniel Veillard - 0.7.6-1 - upstream release of 0.7.6 - Use QEmu new device adressing when possible - Implement CPU topology support for QEMU driver - Implement SCSI controller hotplug/unplug for QEMU - Implement support for multi IQN - a lot of fixes and improvements * Thu Jan 14 2010 Chris Weyl 0.7.5-3 - bump for libssh2 rebuild * Tue Jan 12 2010 Daniel P. Berrange - 0.7.5-2 - Rebuild for libparted soname change * Wed Dec 23 2009 Daniel Veillard - 0.7.5-1 - Add new API virDomainMemoryStats - Public API and domain extension for CPU flags - vbox: Add support for version 3.1 - Support QEMU's virtual FAT block device driver - a lot of fixes * Fri Nov 20 2009 Daniel Veillard - 0.7.4-1 - upstream release of 0.7.4 - udev node device backend - API to check object properties - better QEmu monitor processing - MAC address based port filtering for qemu - support IPv6 and multiple addresses per interfaces - a lot of fixes * Thu Nov 19 2009 Daniel P. Berrange - 0.7.2-6 - Really fix restore file labelling this time * Wed Nov 11 2009 Daniel P. Berrange - 0.7.2-5 - Disable numactl on s390[x]. Again. * Wed Nov 11 2009 Daniel P. Berrange - 0.7.2-4 - Fix QEMU save/restore permissions / labelling * Thu Oct 29 2009 Mark McLoughlin - 0.7.2-3 - Avoid compressing small log files (#531030) * Thu Oct 29 2009 Mark McLoughlin - 0.7.2-2 - Make libvirt-devel require libvirt-client, not libvirt - Fix qemu machine types handling * Wed Oct 14 2009 Daniel Veillard - 0.7.2-1 - Upstream release of 0.7.2 - Allow to define ESX domains - Allows suspend and resulme of LXC domains - API for data streams - many bug fixes * Tue Oct 13 2009 Mark McLoughlin - 0.7.1-12 - Fix restore of qemu guest using raw save format (#523158) * Fri Oct 9 2009 Mark McLoughlin - 0.7.1-11 - Fix libvirtd memory leak during error reply sending (#528162) - Add several PCI hot-unplug typo fixes from upstream * Tue Oct 6 2009 Mark McLoughlin - 0.7.1-10 - Create /var/log/libvirt/{lxc,uml} dirs for logrotate - Make libvirt-python dependon on libvirt-client - Sync misc minor changes from upstream spec * Tue Oct 6 2009 Mark McLoughlin - 0.7.1-9 - Change logrotate config to weekly (#526769) * Thu Oct 1 2009 Mark McLoughlin - 0.7.1-8 - Disable sound backend, even when selinux is disabled (#524499) - Re-label qcow2 backing files (#497131) * Wed Sep 30 2009 Mark McLoughlin - 0.7.1-7 - Fix USB device passthrough (#522683) * Mon Sep 21 2009 Chris Weyl - 0.7.1-6 - rebuild for libssh2 1.2 * Mon Sep 21 2009 Mark McLoughlin - 0.7.1-5 - Don't set a bogus error in virDrvSupportsFeature() - Fix raw save format * Thu Sep 17 2009 Mark McLoughlin - 0.7.1-4 - A couple of hot-unplug memory handling fixes (#523953) * Thu Sep 17 2009 Daniel Veillard - 0.7.1-3 - disable numactl on s390[x] * Thu Sep 17 2009 Daniel Veillard - 0.7.1-2 - revamp of spec file for modularity and RHELs * Tue Sep 15 2009 Daniel Veillard - 0.7.1-1 - Upstream release of 0.7.1 - ESX, VBox driver updates - mutipath support - support for encrypted (qcow) volume - compressed save image format for Qemu/KVM - QEmu host PCI device hotplug support - configuration of huge pages in guests - a lot of fixes * Mon Sep 14 2009 Mark McLoughlin - 0.7.1-0.2.gitfac3f4c - Update to newer snapshot of 0.7.1 - Stop libvirt using untrusted 'info vcpus' PID data (#520864) - Support relabelling of USB and PCI devices - Enable multipath storage support - Restart libvirtd upon RPM upgrade * Sun Sep 6 2009 Mark McLoughlin - 0.7.1-0.1.gitg3ef2e05 - Update to pre-release git snapshot of 0.7.1 - Drop upstreamed patches * Wed Aug 19 2009 Mark McLoughlin - 0.7.0-6 - Fix migration completion with newer versions of qemu (#516187) * Wed Aug 19 2009 Mark McLoughlin - 0.7.0-5 - Add PCI host device hotplug support - Allow PCI bus reset to reset other devices (#499678) - Fix stupid PCI reset error message (bug #499678) - Allow PM reset on multi-function PCI devices (bug #515689) - Re-attach PCI host devices after guest shuts down (bug #499561) - Fix list corruption after disk hot-unplug - Fix minor 'virsh nodedev-list --tree' annoyance * Thu Aug 13 2009 Daniel P. Berrange - 0.7.0-4 - Rewrite policykit support (rhbz #499970) - Log and ignore NUMA topology problems (rhbz #506590) * Mon Aug 10 2009 Mark McLoughlin - 0.7.0-3 - Don't fail to start network if ipv6 modules is not loaded (#516497) * Thu Aug 6 2009 Mark McLoughlin - 0.7.0-2 - Make sure qemu can access kernel/initrd (bug #516034) - Set perms on /var/lib/libvirt/boot to 0711 (bug #516034) * Wed Aug 5 2009 Daniel Veillard - 0.7.0-1 - ESX, VBox3, Power Hypervisor drivers - new net filesystem glusterfs - Storage cloning for LVM and Disk backends - interface implementation based on netcf - Support cgroups in QEMU driver - QEmu hotplug NIC support - a lot of fixes * Fri Jul 3 2009 Daniel Veillard - 0.6.5-1 - release of 0.6.5 * Fri May 29 2009 Daniel Veillard - 0.6.4-1 - release of 0.6.4 - various new APIs * Fri Apr 24 2009 Daniel Veillard - 0.6.3-1 - release of 0.6.3 - VirtualBox driver * Fri Apr 3 2009 Daniel Veillard - 0.6.2-1 - release of 0.6.2 * Fri Mar 4 2009 Daniel Veillard - 0.6.1-1 - release of 0.6.1 * Sat Jan 31 2009 Daniel Veillard - 0.6.0-1 - release of 0.6.0 * Tue Nov 25 2008 Daniel Veillard - 0.5.0-1 - release of 0.5.0 * Tue Sep 23 2008 Daniel Veillard - 0.4.6-1 - release of 0.4.6 * Mon Sep 8 2008 Daniel Veillard - 0.4.5-1 - release of 0.4.5 * Wed Jun 25 2008 Daniel Veillard - 0.4.4-1 - release of 0.4.4 - mostly a few bug fixes from 0.4.3 * Thu Jun 12 2008 Daniel Veillard - 0.4.3-1 - release of 0.4.3 - lots of bug fixes and small improvements * Tue Apr 8 2008 Daniel Veillard - 0.4.2-1 - release of 0.4.2 - lots of bug fixes and small improvements * Mon Mar 3 2008 Daniel Veillard - 0.4.1-1 - Release of 0.4.1 - Storage APIs - xenner support - lots of assorted improvements, bugfixes and cleanups - documentation and localization improvements * Tue Dec 18 2007 Daniel Veillard - 0.4.0-1 - Release of 0.4.0 - SASL based authentication - PolicyKit authentication - improved NUMA and statistics support - lots of assorted improvements, bugfixes and cleanups - documentation and localization improvements * Sun Sep 30 2007 Daniel Veillard - 0.3.3-1 - Release of 0.3.3 - Avahi support - NUMA support - lots of assorted improvements, bugfixes and cleanups - documentation and localization improvements * Tue Aug 21 2007 Daniel Veillard - 0.3.2-1 - Release of 0.3.2 - API for domains migration - APIs for collecting statistics on disks and interfaces - lots of assorted bugfixes and cleanups - documentation and localization improvements * Tue Jul 24 2007 Daniel Veillard - 0.3.1-1 - Release of 0.3.1 - localtime clock support - PS/2 and USB input devices - lots of assorted bugfixes and cleanups - documentation and localization improvements * Mon Jul 9 2007 Daniel Veillard - 0.3.0-1 - Release of 0.3.0 - Secure remote access support - unification of daemons - lots of assorted bugfixes and cleanups - documentation and localization improvements * Fri Jun 8 2007 Daniel Veillard - 0.2.3-1 - Release of 0.2.3 - lot of assorted bugfixes and cleanups - support for Xen-3.1 - new scheduler API * Tue Apr 17 2007 Daniel Veillard - 0.2.2-1 - Release of 0.2.2 - lot of assorted bugfixes and cleanups - preparing for Xen-3.0.5 * Thu Mar 22 2007 Jeremy Katz - 0.2.1-2.fc7 - don't require xen; we don't need the daemon and can control non-xen now - fix scriptlet error (need to own more directories) - update description text * Fri Mar 16 2007 Daniel Veillard - 0.2.1-1 - Release of 0.2.1 - lot of bug and portability fixes - Add support for network autostart and init scripts - New API to detect the virtualization capabilities of a host - Documentation updates * Fri Feb 23 2007 Daniel P. Berrange - 0.2.0-4.fc7 - Fix loading of guest & network configs * Fri Feb 16 2007 Daniel P. Berrange - 0.2.0-3.fc7 - Disable kqemu support since its not in Fedora qemu binary - Fix for -vnc arg syntax change in 0.9.0 QEMU * Thu Feb 15 2007 Daniel P. Berrange - 0.2.0-2.fc7 - Fixed path to qemu daemon for autostart - Fixed generation of block in XML - Pre-create config directory at startup * Wed Feb 14 2007 Daniel Veillard 0.2.0-1.fc7 - support for KVM and QEmu - support for network configuration - assorted fixes * Mon Jan 22 2007 Daniel Veillard 0.1.11-1.fc7 - finish inactive Xen domains support - memory leak fix - RelaxNG schemas for XML configs * Wed Dec 20 2006 Daniel Veillard 0.1.10-1.fc7 - support for inactive Xen domains - improved support for Xen display and vnc - a few bug fixes - localization updates * Thu Dec 7 2006 Jeremy Katz - 0.1.9-2 - rebuild against python 2.5 * Wed Nov 29 2006 Daniel Veillard 0.1.9-1 - better error reporting - python bindings fixes and extensions - add support for shareable drives - add support for non-bridge style networking - hot plug device support - added support for inactive domains - API to dump core of domains - various bug fixes, cleanups and improvements - updated the localization * Tue Nov 7 2006 Daniel Veillard 0.1.8-3 - it's pkgconfig not pgkconfig ! * Mon Nov 6 2006 Daniel Veillard 0.1.8-2 - fixing spec file, added %dist, -devel requires pkgconfig and xen-devel - Resolves: rhbz#202320 * Mon Oct 16 2006 Daniel Veillard 0.1.8-1 - fix missing page size detection code for ia64 - fix mlock size when getting domain info list from hypervisor - vcpu number initialization - don't label crashed domains as shut off - fix virsh man page - blktapdd support for alternate drivers like blktap - memory leak fixes (xend interface and XML parsing) - compile fix - mlock/munlock size fixes * Fri Sep 22 2006 Daniel Veillard 0.1.7-1 - Fix bug when running against xen-3.0.3 hypercalls - Fix memory bug when getting vcpus info from xend * Fri Sep 22 2006 Daniel Veillard 0.1.6-1 - Support for localization - Support for new Xen-3.0.3 cdrom and disk configuration - Support for setting VNC port - Fix bug when running against xen-3.0.2 hypercalls - Fix reconnection problem when talking directly to http xend * Tue Sep 5 2006 Jeremy Katz - 0.1.5-3 - patch from danpb to support new-format cd devices for HVM guests * Tue Sep 5 2006 Daniel Veillard 0.1.5-2 - reactivating ia64 support * Tue Sep 5 2006 Daniel Veillard 0.1.5-1 - new release - bug fixes - support for new hypervisor calls - early code for config files and defined domains * Mon Sep 4 2006 Daniel Berrange - 0.1.4-5 - add patch to address dom0_ops API breakage in Xen 3.0.3 tree * Mon Aug 28 2006 Jeremy Katz - 0.1.4-4 - add patch to support paravirt framebuffer in Xen * Mon Aug 21 2006 Daniel Veillard 0.1.4-3 - another patch to fix network handling in non-HVM guests * Thu Aug 17 2006 Daniel Veillard 0.1.4-2 - patch to fix virParseUUID() * Wed Aug 16 2006 Daniel Veillard 0.1.4-1 - vCPUs and affinity support - more complete XML, console and boot options - specific features support - enforced read-only connections - various improvements, bug fixes * Wed Aug 2 2006 Jeremy Katz - 0.1.3-6 - add patch from pvetere to allow getting uuid from libvirt * Wed Aug 2 2006 Jeremy Katz - 0.1.3-5 - build on ia64 now * Thu Jul 27 2006 Jeremy Katz - 0.1.3-4 - don't BR xen, we just need xen-devel * Thu Jul 27 2006 Daniel Veillard 0.1.3-3 - need rebuild since libxenstore is now versionned * Mon Jul 24 2006 Mark McLoughlin - 0.1.3-2 - Add BuildRequires: xen-devel * Wed Jul 12 2006 Jesse Keating - 0.1.3-1.1 - rebuild * Tue Jul 11 2006 Daniel Veillard 0.1.3-1 - support for HVM Xen guests - various bugfixes * Mon Jul 3 2006 Daniel Veillard 0.1.2-1 - added a proxy mechanism for read only access using httpu - fixed header includes paths * Wed Jun 21 2006 Daniel Veillard 0.1.1-1 - extend and cleanup the driver infrastructure and code - python examples - extend uuid support - bug fixes, buffer handling cleanups - support for new Xen hypervisor API - test driver for unit testing - virsh --conect argument * Mon Apr 10 2006 Daniel Veillard 0.1.0-1 - various fixes - new APIs: for Node information and Reboot - virsh improvements and extensions - documentation updates and man page - enhancement and fixes of the XML description format * Tue Feb 28 2006 Daniel Veillard 0.0.6-1 - added error handling APIs - small bug fixes - improve python bindings - augment documentation and regression tests * Thu Feb 23 2006 Daniel Veillard 0.0.5-1 - new domain creation API - new UUID based APIs - more tests, documentation, devhelp - bug fixes * Fri Feb 10 2006 Daniel Veillard 0.0.4-1 - fixes some problems in 0.0.3 due to the change of names * Wed Feb 8 2006 Daniel Veillard 0.0.3-1 - changed library name to libvirt from libvir, complete and test the python bindings * Sun Jan 29 2006 Daniel Veillard 0.0.2-1 - upstream release of 0.0.2, use xend, save and restore added, python bindings fixed * Wed Nov 2 2005 Daniel Veillard 0.0.1-1 - created